1. The working principle of servo motor: The rotor inside the servo motor is a permanent magnet, and the U/V/W three-phase electricity controlled by the driver forms an electromagnetic field. The rotor rotates under the action of this magnetic field. At the same time, the encoder built-in to the mot
There are three control methods for servo motors: position control, speed control, and torque control. What is used here is position control.Before position control, it is necessary to set the parameters of the servo motor. For example, after calculation, it is found that 1000 pulses are required fo
A motor encoder is a device that can convert motor motion into digital signals. It mainly consists of encoder gears, encoder signal conversion circuits, pulse counters, and signal interfaces. Motor encoders are commonly used in fields such as robotics, industrial automation, medical equipment, and t
An encoder is a rotary sensor that converts rotational displacement into a series of digital pulse signals, which can be used to control angular displacement. If the encoder is combined with a gear bar or screw, it can also be used to measure linear displacement. After the encoder generates an elect
1. Different propertiesDifferential encoder, also known as incremental encoder, converts displacement into periodic electrical signals, which are then converted into counting pulses. The number of pulses is used to represent the magnitude of displacement. According to the working principle, encoders
An encoder is a device that compiles and converts signals (such as bitstreams) or data into signal forms that can be used for communication, transmission, and storage. Convert the angular displacement or linear displacement of the encoder into an electrical signal, the former is called a code wheel,
EN
